E50M Manual Flex Waterborne Spray Gun Cleaner

Waterborne LogoWaterborne

This is an affordable spray gun cleaner with all of the same cleaning tools as our larger models. The E50M is ideal for the shop with limited space, and can be used with the optional leg kit, the optional wall mount kit, or set on a cart or table with a hole cut out for the drain and suction lines.

Included with the Cleaning System is a Two-Pack of Water Wave™, a Pre-Rinse System that includes a 5-gallon container with a funnel, a Pre-Rinse Bottle and a 6 pack of H2O DRY™ with 3 Liners and 3 Stir Sticks, and finally a 5-gallon container for the cleaning solution.

Click below for Folder Selection

Standard Features:

  • Water Wave™ Sample – Cleaning Solution with Micro Film Technology
  • Floccer™ Sample –  Flocculation Powder for Clarification Recycling
  • Stainless Steel Basin – Compact Design, ideal for Tight Space Applications
  • Powerpistol™ – Quick & powerful Spray Gun Cleaning
  • Powerclean™ – Compressed Air Connection Protecting Air Passageways
  • Pulsating Fluid – Powerful Cleaning Efficiency
  • Splash Pad – in Basin to Reduce Splash
  • Flow Brush – Improved Cleaning of dried material
  • Air Pistol – Quick Drying Interior & Exterior of Residual Fluid
  • Foot Pedal – Pump Control for Hands Free Operation
  • Ultra Light™ QD’s – High Flow light weight Corrosion Resistant
  • 5 Gallon Container w/ Lid – Fluid Reservoir
  • Green Powder Coated Finish – Long Maintenance Life
  • Input Air Filter/Regulator – Proper System Air Control
  • Pre-Rinse System – Includes container, 3-Liners, funnel, 6pak H2O DRY, 3 stir sticks, 1 pre-rinse bottle
  • NESHAP and NFPA 33 Compliant – Meets Requirements

Optional Upgrades:

  • Heat Systems – Elevates Temperature to Reduce Cleaning Time
    • Standard Heat – Hot Water Tank System (120V @ 4.6A)
    • Heat On Demand – Rapid Temp Rise System Cls I Div 1 (120V @ 10.5A)
  • H2O Dry™ System – Dries waterborne waste paint
  • Mounting Stand with Legs (Adds 35.5″ to overall height) – Creates a free standing system
  • Wall Mount Kit – Includes uni-strut and hardware for mounting to single skin wall. Additional hardware may be required.
  • Protect Film – Maintenance Film Coating
  • Single and Dual Cartridge Filtration Recycling System – Includes a 75 Micron Filter. See Enviro Filtration Info
  • Clarifier Recycling System w/ Air Bubbler – 3 Containers and Dual Filter System


  • Overall:
    • 24″ H x 18″ W x 12″D
    • 610 mm x 457 mm x 305 mm
  • Working (Stainless Basin): 
    • 12″ D x 16.75″ W x 14″ H
    • 305 mm x 426mm x 356 mm
  • Weight:  45 lbs. (21 kg)
  • Shipping: Freight