Improve Productivity / Superior Cleaning Results
BECCA’s HEAT Systems are available on ENVIRO Waterborne Spray Gun Cleaners models E40M, E50M, E100M, E300A, E700M, & E800A. The BECCA Waterborne Gun Cleaners are in most of the Paint Company Training Centers across the USA. The optional HEAT Systems is in nearly all. Often trainers tell us that by elevating the cleaning solution temperature to approximately 120 degrees, greatly improves the effectiveness of the solution as well as the speed of the cleaning process. BECCA offers two types of HEATERS:
EXP HEAT System
The BECCA EXP-HEAT, Heat-On-Demand, is similar to other new water heater systems being utilized in home “on-demand” systems. It is fast, energy efficient and very durable. This heat system is explosion proof. Therefore, the heat system may be be placed in the paint mix room. As well this system meets the requirements of NFPA33 for Class I DIv1. (120V @ 10.5A). It comes with a 10′ of Cls I Div 1 cable & a 7-Day programmable timer (non-explosion proof) that would be located outside a classified area.
Standard HEAT System
The BECCA HEATER5 (Do not use in Cls I Div 1 areas) requires more attention and is less expensive. Like a hot water tank, it requires energy over a longer period of time (2-3 hours) to bring the water to the proper temperature. The system employs a heat band around the lower portion of the insulated container. We include a 7 Day programmable timer with each unit, as a result the cleaning solution can be “ready to go” when the shop is “ready to clean spray guns”. (120V @ 4.6A).
- HEAT SYSTEMS – Elevates Temperature to Reduce Cleaning Time
- Heat On Demand – Rapid Temp Rise System Cls I Div 1 (120V @ 10.5A)
- Standard Heat – Hot Water Tank System (120V @ 4.6A)